4
Parts Replacement and Cleaning > Image Formation System > Removing the Toner Bottle manually > Preparations
4) Fit the spring on the Duplex Unit to the protrusion on the bearing holder of Secondary
Transfer Outer Roller Unit and install it one after other.
5) Reinstall the rear stopper.
■ Actions after Replacement
When replacing the Secondary Transfer Outer Roller, execute the service mode.
COPIER > FUNCTION > CLEANING > TNR-COAT
Execute the following in user mode: (Settings/Registration > Adjustment/Maintenance >
Adjust Image Quality > Auto Adjust Gradation).
4
Parts Replacement and Cleaning > Image Formation System > Removing the Toner Bottle manually > Preparations
Removing the Toner Bottle manually
■ Preparations
1) Open the Right Lower Cover and Right Upper Cover.(Refer to page 4-175)
2) Remove the Right Rear Cover.
• 1 screw (RS tight; M4)
• 2 screws (TP; M3)
• 1 claw
F-4-229
● Remove the Left Rear Cover, Left Rear Sub Cover.
3) Remove the Left Rear Cover.
• 2 rubber caps
• 2 screws
• 5 claws
b
x3
Rubber cap
x2
x5
Rubber cap
4-147
Claw
F-4-230
Claws
F-4-231
4-147