Removing The Hopper (C) - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (C) > Procedure

Removing the Hopper (C)

■ Preparations
1) Release the lock of Toner Container. (By service mode)
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.(Refer to page 4-104)
3) Remove the ITB Unit.(Refer to page 4-105)
4) Remove the Process Unit.(Refer to page 4-132)
5) Remove the Color Drum Heater. (When the option is installed)(Refer to page 1-1)
6) Remove the Toner Container Front Inner Cover.(Refer to page 4-154)
■ Procedure
1) Remove the Reverse Tray.
2) Remove the Inside Rear Cover 1 & 2.
• 3 caps
• 3 screws (RS)
x3
Inner rear cover 1
4 Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (C) > Procedure
Inner rear cover 2
F-4-275
3) Remove the 2 screws from the Harness Guide.
x2
4) While opennig the Guide, remove the Hopper Upper Stay.
• 2 screws (RS)
x2
5) Remove the Secondary Delivery Duct.
• 2 screws (P tight)
x2
4-161
F-4-276
F-4-277
F-4-278
4-161