Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1280

11) Remove the Signal Cable and the Power Cable.
CAUTION:
Do not remove the Fan Cable.
• 1 Edge Saddle
• 3 Wire Saddles
• 1 Cable Retainer
Cable Retainer
x2
Wire Saddle
x4
9
Installation > [TYPE-4] > Installation Procedure > Removing and Installing the HDD Unit
Edge Saddle
Signal Cable
Fan Cable
Power Cable
F-9-560
9 Installation > [TYPE-4] > Installation Procedure > Removing and Installing the HDD Unit
12) Open the HDD Lid.
• 1 Screw (Removed screw will not be used.)
13) When the Cable Cover is installed, remove it. (Removed Cable Cover and screw will
not be used.)
• 1 Screw
9-210
F-9-561
F-9-562
9-210