Canon imageRUNNER ADVANCE C5255 Series Service Manual page 509

4
Parts Replacement and Cleaning > Pickup Feed System > Removing the Multi-purpose Tray Separation Roller > Procedure
CAUTION:
Align the groove of Multi-purpose Tray Separation Roller with the protrusion of limiter
and push it until it clicks.
Multi-purpose tray
separation roller
Limiter
4 Parts Replacement and Cleaning > Pickup Feed System > Removing the Multi-purpose Tray Separation Roller > Procedure
Protrusion
CAUTION: Installing the Middle Feed Guide and the Front Feed Guide
In order to align the height of the Middle Feed Guide and the Front Feed Guide, be sure
to follow the following steps when installing.
• Be careful not to remove the 2 rubbers of the Middle Feed Guide when installing.
When the rubbers are not properly installed, abnormal noise may occur at pickup
from the Multi-purpose Tray.
1. While holding down the Multi-purpose Tray Separation Roller Shaft, insert the Middle
Feed Guide from the hole [A] of the plate, and install the 2 Shaft Supports to the
Feed Guide Shaft.
Middle Feed Guide
Shaft
Supports
Multi-purpose Tray
Separation
Roller Shaft
2. Open the Multi-purpose Tray Sub Cover, and fit the hole of the Middle Feed Guide to
the claw of the Multi-purpose Tray Pickup Frame.
Multi-purpose Tray
Sub Cover
4-189
[A]
F-4-365
Middle Feed Guide
Claw
4-189