Canon imageRUNNER ADVANCE C5255 Series Service Manual page 997

COPIER > OPTION > IMG-MCON
IFXEML-Z Set img proc at clr iFAX,mail recv print
Lv.1 Details To set the image processing which is performed when printing color
iFAX or received e-mail.
Use case When there is a request for image improvement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Equivalent to PDL text mode (Black text is reproduced with 4 colors.
Error diffused image. The hue of the photo area is more vivid than that
of 2.)
1: Equivalent to PDL photo mode (Black text is reproduced with 4
colors. Screen processed image.)
2: Equivalent to scanned text mode (Black text is reproduced with a
single Bk color. Error diffused image. The hue of the photo area might
be different from that of 0.)
3: Equivalent to scanned photo mode (Black text is reproduced with a
single Bk color. Screen processed image.)
Default value 0
BMLNKS-Z Set img proc at BMLinkS reception print
Lv.1 Details To set the image processing which is performed when printing
received BMLinkS.
Use case When there is a request for image improvement
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Equivalent to PDL text mode (Black text is reproduced with 4 colors.
Error diffused image. The hue of the photo area is more vivid than that
of 2.)
1: Equivalent to PDL photo mode (Black text is reproduced with 4
colors. Screen processed image.)
2: Equivalent to scanned text mode (Black text is reproduced with a
single Bk color. Error diffused image. The hue of the photo area might
be different from that of 0.)
3: Equivalent to scanned photo mode (Black text is reproduced with a
single Bk color. Screen processed image.)
Default value 0
8
Service Mode > COPIER > OPTION > IMG-MCON
8 Service Mode > COPIER > OPTION > IMG-MCON
COPIER > OPTION > IMG-MCON
REDU-CNT Set toner deposit amount limt at clr adj
Lv.2 Details To set whether to limit the toner deposit amount at color adjustment
(color balance, fine adjustment of density).
When 0 is set, the color adjustment value is reflected to an image
precisely, but toner scattering in the Transfer Assembly and Fixing
Assembly might occur, and paper might wind around the Fixing
Assembly.
Use case - Upon user's request
- When reflecting the color adjustment value to an image precisely
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 0 is set, toner scattering in the Transfer Assembly and Fixing
Assembly might occur, and paper might wind around the Fixing
Assembly.
Display/adj/set range 0 to 1
0: Toner deposit amount is not limited.
1: Toner deposit amount is limited to the specified amount.
Default value 1
VP-ART Setting of line art processing
Lv.2 Details To set outline processing for line art on scalable PDF.
In the outline processing, a binary image outline is extracted in the
field which is recognized as line art, and is converted into vector data.
Specify whether to convert the binary image outline into vector data
or to recognize it as one line (as a thin line). For the thin line, the line
width can be specified.
Change this value when you want to obtain an output of a wide-width
line as one line rather than as an outline (when you want to prioritize
edit operation as a line rather than image quality).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 99
Default value 1
8-177
8-177