Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1013

COPIER > OPTION > USER
MB-CCV Control card usage limit for Mail Box
Lv.2 Details To restrict use of control card for Mail Box.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Unlimited, 1: Limited
Default value 1
CONTROL Charge setting of PDL job
Lv.1 Details To set charge count transmission of PDL job to the connected charge
management device (Coin Manager or non-Canon-made control card).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No charge, 1: Charge
Default value 0
B4-L-CNT Count setting of B4 size
Lv.1 Details To set B4 count with software counter 1 to 8 as to whether B4 is counted
as large size or small size.
Selecting 1 counts B4 or larger size paper as large size while paper
smaller than B4 size as small size.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Small size, 1: Large size
Default value 0
Related service mode COPIER> OPTION> CUSTOM> SC-L-CNT
TRY-STP Set of suspension at full Finisher Tray
Lv.2 Details To set whether to suspend or continue output when the full Finisher Tray
is detected.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: At detection of full tray, 1: Detection of height only
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
MF-LG-ST Display/hide of long original mode
Lv.2 Details To set whether to display or hide the [Long Original] button.
When 1 is set, [Long Original] button is displayed in Copy> Options
screen and the long length paper becomes available.
Use case Upon user's request (use of long original or long length paper)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Long length paper is delivered from the Second Delivery Outlet
(excluding delivery from the Inner Finisher).
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
CNT-DISP Display/hide of serial number
Lv.2 Details To set whether to display or hide the serial number on the Counter
Check screen.
Use case When setting to display/hide serial number on the Counter Check screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Display, 1: Hide
Default value 0
COPY-JOB Setting of copy job reservation
Lv.1 Details To set whether to allow copy job reservation when the Card Reader/Coin
Manager is used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
OP-SZ-DT Orgnl size dtct ON/OFF at copyboard open
Lv.2 Details To set ON/OFF of original size detection while the Copyboard is opened.
When "0: OFF" is set, enter original size manually from the Control
Panel.
When "1: ON" is set, original size is detected automatically.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-193
8-193