Installing The Itb Cleaning Blade Unit - Canon imageRUNNER ADVANCE C5255 Series Service Manual

4
Parts Replacement and Cleaning > Image Formation System > Installing the ITB Cleaning Blade Unit > Procedure
1) Remove the ITB Cleaning Blade Unit and put it on the paper.
• 1 Stepped Screw
• 1 Wave Washer
NOTE:
Hold the screw area of 2 screws on the ITB Cleaning Blade Unit so that it is easy to
remove.
4 Parts Replacement and Cleaning > Image Formation System > Installing the ITB Cleaning Blade Unit > Procedure

Installing the ITB Cleaning Blade Unit

■ Preparations
1) Open the Front Cover, Right Lower Cover and Right Upper Cover.(Refer to page 4-104)
2) Remove the ITB Cover.(Refer to page 4-104)
3) Remove the ITB Unit.(Refer to page 4-105)
4) Remove the ITB Cleaning Unit.(Refer to page 4-109)
5) Removing the ITB Cleaning Blade Unit.(Refer to page 4-110)
■ Procedure
CAUTION:
Do not touch the ITB Cleaning Blade.
F-4-137
1) Insert an A4 size paper between the Blade Unit installation position of the ITB Cleaning
Unit and the sheet.
4-111
4-111