Maintaining The Srx5400 Line Cards And Modules - Juniper SRX5400 Hardware Manual
Services gateway
Hide thumbs
Also See for SRX5400:
- Hardware manual (406 pages) ,
- Reference (109 pages) ,
- Manual (102 pages)
Table of Contents
Advertisement
admin@cluster> monitor interface traffic
To ensure sessions are created and deleted on the upgraded node, issue the following command:
admin@cluster> show security monitoring
14. Repeat Step
1
through
15. To ensure that the ISHU process is completed successfully, check the status of the cluster by issuing
the following command:
admin@cluster> show chassis cluster status
For detailed information about chassis cluster, see the
www.juniper.net/documentation/.
Maintaining the SRX5400 Line Cards and Modules
IN THIS SECTION
Holding an SRX5400 Services Gateway Card | 278
Storing an SRX5400 Services Gateway Card | 280
Replacing SRX5400 Services Gateway MPCs | 280
Replacing SRX5400 Services Gateway MICs | 286
Installing an MPC and MICs in an Operating SRX5400 Services Gateway Chassis Cluster | 290
Maintaining SPCs on the SRX5400 Services Gateway | 293
Replacing SRX5400 Services Gateway SPCs | 295
Replacing SPCs in an Operating SRX5400, SRX5600, or SRX5800 Services Gateways Chassis Cluster | 300
In-Service Hardware Upgrade for SRX5K-SPC3 in a Chassis Cluster | 303
12
for the primary node.
Chassis Cluster User Guide for Security Devices
277
at
Advertisement
Table of Contents
Troubleshooting
