Srx5600 Services Gateway Installation; Overview Of Installing The Srx5600 Services Gateway - Juniper SRX5600 Hardware Manual

CHAPTER 3

SRX5600 Services Gateway Installation

Overview of Installing the SRX5600 Services Gateway

Copyright © 2010, Juniper Networks, Inc.
This section includes the following topics:
Overview of Installing the SRX5600 Services Gateway on page 43
To install the SRX5600 Services Gateway:
Prepare your installation site as described in "Site Preparation Checklist for the
1.
SRX5600 Services Gateway" on page 45.
Review the safety guidelines explained in "SRX5600 Services Gateway General Safety
2.
Guidelines and Warnings" on page 167.
Unpack the services gateway and verify the parts.
3.
"Unpacking the SRX5600 Services Gateway" on page 53
a.
"Verifying the SRX5600 Services Gateway Parts Received" on page 55
b.
Install the mounting hardware as described in "Installing the SRX5600 Services
4.
Gateway Mounting Hardware for a Rack or Cabinet" on page 57.
Lift the services gateway on to the rack. Because of the weight of the services gateway,
5.
we recommend that you use a mechanical lift.
Installing the SRX5600 Services Gateway Using a Mechanical Lift on page 61
Installing the SRX5600 Services Gateway Chassis in the Rack Manually on page 235
Connect cables to the network and external devices.
6.
Connecting the SRX5600 Services Gateway to a Management Console or an
Auxiliary Device on page 67
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band
Management on page 66
Connecting the Alarm Relay Wires to the SRX5600 Services Gateway Craft Interface
on page 120
Connect the grounding cable as described in "Grounding the SRX5600 Services
7.
Gateway" on page 72.
43