Implementation Summary - Avaya 1000 Installation And Commissioning Manual

Implementation summary

To prepare for a Branch Office, refer to the Avaya Communication Server 1000E: Planning and
Engineering (NN43041-220) document. This contains important electrical information and safety
guidelines.
Follow these steps to implement the Communication Server 1000 Branch Office:
1. At the main office:
a. Upgrade the main office software to the latest release of Communication Server 1000.
See Avaya Communication Server 1000E - Software Upgrades , NN43041-458 or
Avaya Linux Platform Base and Applications Installation and Commissioning,
NN43001-315
b. If not already implemented, implement IP Peer Networking as part of a system
installation or upgrade. See Avaya IP Peer Networking Installation and Commissioning,
NN43001-313.
c. Configure the Branch Office zones.
d. Configure the Branch Office dialing plan.
e. Configure the IP Phone passwords. See
Password Configuration
f. Use NRS Manager to add the System Host Name of the MG 1000B Signaling Server to
the H.323 endpoint list. This action enables the Signaling Server at the Branch Office to
register with the Gatekeeper (H.323). See Avaya Network Routing Service Installation
and Commissioning, NN43001-564.
2. For each Branch Office:
a. Install the MG 1000B Core. See
b. Install the MG 1000B Signaling Server. For more information on installing the Signaling
Server, seeAvaya Signaling Server IP Line Applications Fundamentals, NN43001-125 .
c. Install the Branch Office software, starting with Server and Gateway Controller.
Software for the MG 1000B Server and Gateway Controller comes with preprogrammed
data that can be selected during the installation procedure. For Co-resident Call Server
and Signaling Server, use the Avaya UCM Deployment Manager to install the software.
For more information about installing the Co-resident Call Server and Signaling Server,
see Avaya Co-resident Call Server and Signaling Server Fundamentals, NN43001-509.
d. Configure the Branch Office (Customer Data Block and ELAN subnet). For more
information about configuring a new or existing Bandwidth Management zone, see
Avaya IP Peer Networking Installation and Commissioning, NN43001-313.
e. Configure the Branch Office dialing plan.
f. Configure the Voice Gateway Media Cards. Refer to Avaya Signaling Server IP Line
Applications Fundamentals, NN43001-125.
June 2014
Setting and changing the Station Control
on page 110.
Installing an MG 1000B Core
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Implementation summary
on page 113.
85