Avaya 1000 Installation And Commissioning Manual page 169

Validation of MOTN input from Branch User Config is limited to preliminary range checks. The input
string is converted to a packed TN and the MOTN and MOTN type are set as either Small or Large
System.
A Branch User Identification (BUID) and Main Office TN (MOTN) can be provisioned, if the IP Phone
belongs to a MG 1000B. The local TN configured for the Branch Office telephone accepts a four-
field format.
This prompt accepts TNs in two or four-field format. If nothing is entered for the BUID, then the
telephone does not get automatically redirected to the Main Office. The value of BUID and MOTN
are assigned in the TN block when the technician performs the Branch User Config. At this time, the
User ID entered is saved as the value of BUID and the Main Office TN is saved as the MOTN. Once
the value for BUID and MOTN are known at the Branch Office, a telephone is automatically
redirected to the Main Office when the telephone re-powers or when WAN connectivity to the Main
Office is restored after being temporarily lost.
Table 25: LD 11 Branch Office changes for IP Phones
Prompt
REQ
TYPE
CUST
TN
Prompt
BUID
MOTN
June 2014
Responses
NEW/CHG
2004P1, 2004P2,
2002P1, 2002P2,
2001P2, 2050PC,
2050MC, 2033, 2210,
2211, 2212, 6120, 6140,
2007, 1110, 1120,
1140,1150, 1165, 1210,
1220,1230
<num>
l s c u
Response
<user id>
l s c u
Comments? infodev@avaya.com
Description
IP Phones.
Customer number.
With Communication Server 1000
Release 5.0 or later, MG 1000B with
Gateway Controller, the TN entered for
an IP Phone is l s c u.
Description
Dialable DN, Main Office
user id
Enter X to delete
Main Office TN The
default is the Branch
Office TN entered above,
which for aCS 1000
Release 5.0 and later
MG 1000B with Gateway
Controller is l s c u.
Branch Office Installation and Commissioning
Survivability test
Pkg#
Pkg#
390
390
169