Avaya 1000 Installation And Commissioning Manual page 93

Communication Server 1000M Signaling Server already has a Signaling Server
installed.
g. Configure the Signaling Server.
a. Run the Signaling Server Install Tool, as described.
b. Transfer the node information using Element Manager.
h. Install the Branch Office software, using the Branch Office keycodes. Configure the
Gateway Controller.
The software for a Branch Office is significantly different from the software for a Small
System. Media Gateway 1000B licenses are orderable for expanding capability. The
Media Gateway 1000B uses the standard license increment codes. Unique codes are
available for Branch office. The balance of the Branch licenses are set at a default limit
and cannot be incremented or decremented.
Media Gateway 1000B licenses are orderable for expanding capability and are
highlighted in the table below. The Media Gateway 1000B uses the standard license
increment codes. Branch office unique codes are listed in the following table, see
18: Media Gateway 1000B Parameters
June 2014
on page 94.
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Implementation summary
Figure
93