Avaya 1000 Installation And Commissioning Manual page 129

Have you:
Warning:
Do not modify or use a supplied AC-power cord if it is not the exact type required in the region
where the Signaling Server is installed and used.
Be sure to replace the cord with the correct type.
- a DTE-DTE null modem serial cable (supplied)
• for a Communication Server 1000E CP PM Signaling Server (NTDW61 or NTDW99) or CP DC Signaling
Server (NTDW53):
- NTDW6102E5 - CP PM Signaling Server Hard Drive kit (CP PM only)
- N0118766 - CP PM Signaling Server Hard Drive Installation instructions (CP PM only)
- NTAK19ECE6 - 2 port SDI Cable assembly kit (for cabinet or MG 1000 chassis)
- NTDU0606E6 - 25cm RJ45 Ethernet Cable kit (for MG 1000 chassis)
- a 25-pin to 9-pin straight-through serial cable (not supplied)
- NTC325AAE6 serial adapter kit (if branch office is based on MG 1010 chassis)
- STP ethernet cables for ELAN and TLAN connections (if branch office is based on MG 1010 chassis).
- UTP ethernet cables for serial connections (if branch office is based on MG 1010 chassis)
• for a Communication Server 1000M Avaya CP PM Signaling Server (NTDW66) or CP DC Signaling
Server (NTDW54)
- NTDW6102E5 - CP PM Signaling Server Hard Drive kit (CP PM only)
- N0118766 - CP PM Signaling Server Hard Drive Installation instructions (CP PM only)
- NTAK19ECE6 - 2 port SDI Cable assembly kit
- NTDW69AAE5 - Large System Cabling kit
- N0106745 - Large System Cabling kit installation instructions
- a 25-pin to 9-pin straight-through serial cable (not supplied)
Note:
Save the packaging and packing materials in case you must reship the equipment or peripherals.
Note:
CP PM card Signaling Servers require a 40 GB hard drive and 2 GB of memory. The CP PM version 1
hardware (NTDW61 and NTDW99BAE6) must run BIOS Release 18 or later to support the Linux base
Operating System. The CP PM version 2 (NTDW99CAE6) meets the requirements for Linux. CP PM
version 2 includes an updated hardware design, BIOS, and boot manager.
Made sure the area meets all environmental requirements?
Checked for all power requirements?
Checked for correct grounding facilities?
Obtained the following?
• screwdrivers
June 2014 Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Installing a Signaling Server
129