Avaya 1000 Installation And Commissioning Manual page 39

Figure 7: Communication Server 1000 MG 1000B System with CP PM Co-resident Call Server and
Signaling Server
Communication Server 1000 Release 7.6 continues to support the legacy Branch Office
configuration that uses the SSC processor and Release 5.0 or 5.5 software. Avaya no longer sells
the SSC based-Branch Office.
Various hardware platforms are supported as Signaling Servers. CS 1000 Release 7.6 supports the
following hardware as Signaling Servers:
• CP PM card
• CP DC card
• Commercial-off-the-shelf (COTS) servers
Note:
The HP DL320 G4 and IBM x306m (COTS1) servers are not supported for the Co-res CS and
SS configuration.
Note:
The ISP1100 hardware platform is not supported in Communication Server 1000 Release 6.0 or
later.
An MG 1000B platform can be a new hardware configuration. It can also be a Small System
platform converted to an MG 1000B platform. In the latter case, the cabinet or chassis performs the
same functionality as the MG 1000B Core, and the optional chassis expander performs the same
functionality as the MG 1000B Expander. Refer to
page 90 for more information.
After you convert an MG 1000B platform, the Small System cabinet or chassis is referred to as an
MG 1000B Cabinet or MG 1000B Chassis, as applicable. The optional chassis expander is referred
to as the "MG 1000B Chassis Expander.
June 2014
Converting a Small System to a Branch Office
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
MG 1000B platform hardware description
on
39