Avaya 1000 Installation And Commissioning Manual page 147

Important:
H.323 ID is now Node wide, not element wide.
See Figure 54: Confirm IP telephony node values for Primary and Secondary NCS
page 148 for Primary or Secondary NCS sample configuration located within the H.323
Gateway settings in EM.
• under SIP GW Settings (see
Server on page 148):
- Primary Proxy/Redirect IP address
- Primary Proxy/Redirect IP port
- select Primary Proxy Supports Registration
- Primary Proxy or Redirect server flag
- Secondary Proxy/Redirect IP address (if equipped)
- Secondary Proxy/Redirect IP port
- select Secondary Proxy Supports Registration
- Secondary CDS Proxy or Redirect server flag
To configure a Follower Signaling Server, refer to Avaya Signaling Server Installation and
Commissioning.
To configure an Alternate and Failsafe (if required) NRS, refer to the corresponding procedures in
Avaya IP Peer Networking Installation and Commissioning, NN43001-313.
Figure 53: Confirm IP telephony node values for H.323 Gatekeeper
June 2014
Figure 55: Confirm IP telephony node values SIP Redirect
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Connecting the MG 1000B Core to the network
on
147