Mg 1000B Ip Phone Configuration; Mg 1000B Ip Phone Configuration Using Ld 11 - Avaya 1000 Installation And Commissioning Manual

Prompt
SRCD
3. Configure the Flexible Feature Code in LD 57 to enable Station Control Password Change
(SCPC) and Set-Based Removal if desired.
Table 13: LD 57 Enable password change and set removal features.
Prompt
REQ
TYPE
CUST
FFCT
CODE
- SCPC
4. The SCPW itself is configured during IP Phone configuration using LD 11 (see
MG 1000B IP Phones at the main office using LD 11

MG 1000B IP Phone configuration

After the Branch Office zones and passwords are provisioned, provision the MG 1000B IP Phones
at the main office. These can be provisioned using LD 11 (see
the main office using LD 11
There is no automatic data synchronization between the main office Call Server and MG 1000B Call
Server. The technician must provision the telephone on all pertinent Call Servers or Gateway
Controllers.

MG 1000B IP Phone configuration using LD 11

Use Configuring MG 1000B IP Phones at the main office using LD 11
office to configure MG 1000B IP Phones.
Configuring MG 1000B IP Phones at the main office using LD 11
1. Configure the Branch Office zones and dialing plan.
2. Configure the following telephone data in LD 11:
• Terminal type
• Customer Number
• TN
• Zone
June 2014
Response
(0000)-9999
Response
NEW
FFC
xx
YES
SCPC
xxxx
on page 111).
Comments? infodev@avaya.com
Description
Automatic Set Relocation security code X removes security
code
Description
Add new data.
Flexible Feature Code
Customer number as defined in LD 15
Flexible Feature Confirmation Tone
Station Control Password Change
Code to invoke password change
on page 111).
Configuring MG 1000B IP Phones at
Branch Office Installation and Commissioning
MG 1000B IP Phone configuration
Configuring
on page 111 at the main
111