Avaya 1000 Installation And Commissioning Manual page 186

Emergency Services configuration
Table 31: LD 86 — Configure Route List Index
Prompt
REQ
CUST
FEAT
...
RLI
ENTR
LTER
ROUT
DMI
c. Configure the ESN Special Number and Digit Manipulation in LD 90.
Table 32: LD 90 — Configure ESN Special Number and Digit Manipulation
Prompt
REQ
CUST
FEAT
TRAN
TYPE
SPN
- FLEN
...
Branch Office Installation and Commissioning
186
Response Description
NEW Add new data.
xx Customer number as defined in LD 15
RLB Route List data block
Route List Index to be accessed
0-127 CDP and BARS
0-255 NARS
0-1999 FNP
0-63 Entry number for NARS/BARS Route List
0-6 Route List entry number for CDP
X Precede with X to remove
NO Local Termination entry
Route number
0-511 Range for CSLS; and CS 1000E system
(0)-1999 Digit Manipulation Index number, as previously
defined in LD 86, FEAT = DGT
Response Description
NEW Add new data.
xx Customer number as defined in LD 15
NET Network translation tables
Translator
AC1 Access Code 1 (NARS/BARS)
AC2 Access Code 2 (NARS)
SPN Special code translation data block
x...x Special Number translation.
Enter the SPN digits in groups of 3 or 4 digits,
separated by a space (for example, xxxx xxx xxxx).
The SPN can be up to 19 digits long.
The maximum number of groups allowed is 5.
(0)-24 Flexible Length
The number of digits the system expects to receive
before accessing a trunk and outpulsing these digits.
Comments? infodev@avaya.com
(6.b.i on page 185)
June 2014