Avaya 1000 Installation And Commissioning Manual page 143

Connecting the MG 1000B Core to the network
Figure 51: Branch Office Ethernet connections
From the Gateway Controller, connect the two short Ethernet cables between the Media Gateway
bulkhead and the two 100BaseT ports at the top right corner of the MG 1000B Core. The TLAN
network interfaces exist only on the MG 1000B Voice Gateway Media Cards, IP Phones, and the
Signaling Server, as shown in Figure 13: MG 1000B platform without a chassis expander on
page 50 and Figure 15: MG 1000B platform with a chassis expander on page 52.
Figure 52: Branch Office Co-resident CS and SS Ethernet connections
In the case of Co-resident Call Server and Signaling Server, connect the two short Ethernet cables
between the Server card and the two 100BaseT ports at the top right corner of the MG 1000B Core.
June 2014 Branch Office Installation and Commissioning
143
Comments? infodev@avaya.com