Avaya 1000 Installation And Commissioning Manual page 89

c. Reconfigure the main office Signaling Server to configure the NRS.
d. Upgrade the Main Office Voice Gateway Media Cards to the latest Communication
Server 1000 software release.
2. At each existing Communication Server 1000 Branch Office:
a. If necessary, execute the isetResetAll command on the MG 1000B Signaling
Server(s).
3. Install the new Communication Server 1000 Branch Office running the latest software
release, as described in
June 2014
Upgrade Main Office without IP Phone firmware upgrade
Implementation summary
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
on page 85.
89