Avaya 1000 Installation And Commissioning Manual page 170

MG 1000B telephones
LD 20 prints the IP Phone TN Block and MOTN in the l s c u format, as shown in the following
example:
Figure 72: LD 20 – IP Phone TN Block and MOTN
Refer to Test Local Mode
Testing the telephone for survivability
Test the survivability of the connections and functions using the Test Local Mode command on the
MG 1000B IP Phone.
1. Press the Services key (the key with a Globe icon) to display the Options menu .
2. Use the navigation keys to navigate to Test Local Mode.
3. Press the Select soft key.
This registers the IP Phone to the MG 1000B CP PM.
4. Make and receive a call on the telephone.
5. To redirect the telephone to the main office TPS node:
a. Press the Services key (the key with a Globe icon).
b. Use the navigation keys to navigate to Resume Normal Mode.
c. Press the Select soft key.
This reregisters the telephone at the main office.
If Resume Normal Mode is not selected, the IP Phone automatically returns to Normal
Mode after ten minutes.
Branch Office Installation and Commissioning
170
on page 177 for details on testing Local Mode functionality.
Comments? infodev@avaya.com
June 2014