Connecting The Mg 1000B Core To The Network - Avaya 1000 Installation And Commissioning Manual

MG 1000B software installation
For more information refer to the following documents, which are referenced in the task flow
diagram:
• Avaya Linux Platform Base and Applications Installation and Commissioning, NN43001-315
• Avaya Enterprise Common Manager Fundamentals, NN43001-116
• Avaya Network Routing Service Fundamentals, NN43001-130
• Avaya Communication Server 1000E Installation and Commissioning, NN43041-310
• Avaya Communication Server 1000E - Software Upgrades, NN43041-458
• Avaya Signaling Server IP Line Applications Fundamentals, NN43001-125
• Avaya SIP Line Fundamentals, NN43001-508
• Avaya Security Management Fundamentals, NN43001-604
Installing Gateway Controller software
For details on installing software on a Gateway Controller card, refer to Avaya Communication
Server 1000E Installation and Commissioning, NN43041-310.
Installing Server software
For details on installing software on a Server card, refer to Avaya Communication Server 1000E
Installation and Commissioning, NN43041-310.
Upgrading Gateway Controller software
For details on upgrading software on a Gateway Controller card, refer to Avaya Communication
Server 1000E - Software Upgrades, NN43041-458.
Upgrading Server card software
For details on upgrading software on a Server card, refer to Avaya Communication Server 1000E -
Software Upgrades, NN43041-458.

Connecting the MG 1000B Core to the network

Connecting the MG 1000B Core to the network
The MG 1000B Core has two 100BaseT ports (1 and 2) for Ethernet connection to the network. See
Figure 51: Branch Office Ethernet connections
Branch Office Installation and Commissioning
142
on page 143.
Comments? infodev@avaya.com
June 2014