Chapter 16: Maintenance and diagnostics
Contents
This chapter contains the following topics:
Firmware downloads
Troubleshooting
on page 195
Signaling Server CLI commands
Call Server commands
Co-resident Call Server and Signaling Server restart commands
Firmware downloads
Important:
This section applies only to the IP Phone 2001, IP Phone 2002, IP Phone 2004, IP Phone 2007,
Avaya 1110 IP Deskphone, Avaya 1120E IP Deskphone. Avaya 1140E IP Deskphone, Avaya
1150E IP Deskphone, Avaya 1165E IP Deskphone, Avaya 2033 IP Conference Phone, and
Avaya 1210 IP Deskphone, Avaya 1220 IP Deskphone, Avaya 1230 IP Deskphone. It does not
apply to the IP Phone KEM, Expansion Module for Avaya 1100 Series IP Deskphones, Avaya
2050 IP SoftPhone, WLAN 2210/2211/2212, WLAN 6120/6140, or IP Deskphones with SIP
software.
Enhanced UNIStim Firmware Download for IP Deskphones
Avaya Communication Server 1000 Release 4.5 introduced Enhanced Firmware Download for IP
Deskphones. The Branch Office IP Deskphone firmware is automatically downloaded from the main
office to the Branch Office.
The administrator enters umsUpgradeAll command at the main office. The firmware version on
the Normal Mode Branch Office IP Deskphone is compared to the firmware policy of the main office.
If the firmware is the same as the main office, no firmware update is required. If the firmware is
different, the IP Deskphones are redirected to the Branch Office.
June 2014
on page 193
on page 200
on page 200
Comments? infodev@avaya.com
on page 205
Branch Office Installation and Commissioning
193