Installing Ip Phones Through Ld 11 - Avaya 1000 Installation And Commissioning Manual

Branch office
Hide thumbs Also See for 1000:
Table of Contents

Advertisement

Installing IP Phones through LD 11

To use the Virtual Office feature at the Branch Office in Local Mode, a Station Control Password
must be configured. Refer to
page 110 to provision the Station Control Password at the Branch Office. To prevent user password
confusion, Avaya recommends that the same SCPW be used at the main office and the Branch
Office.
Installing IP Phones through overlays
Branch User IP Phone through LD 11.
Important:
If the installation technician uses LD 11 to configure the Branch User ID and Main Office TN for
an IP Phone, the IP Phone is automatically redirected to the main office after it is registered to
the Branch Office.
Installing IP Phones through overlays
1. Configure the Branch Office zones and dialing plan. Perform this procedure on the MG
1000B Call Server.
2. Configure the following telephone data in LD 11:
• Terminal type
• Customer Number
• TN
• Zone
To automatically redirect the IP Phone to the main office, configure a BUID and its MOTN.
The BUID and MOTN prompts are unique to the Branch Office feature. Leave the MOTN
field blank if it has the same value as the Branch Office TN. If a BUID is not entered, MOTN
is not prompted. In this case, Branch User configuration is still required.
The BUID, or primary DN, of an MG 1000B IP Phone should match its primary DN at the
main office, though this is not a requirement. If different DNs are configured, the dial-in
numbers change when the Branch Office is in Local Mode.
Warning:
Do not delete the BUID/MOTN. If they are subsequently deleted, the association
between the main office and the Branch Office will be lost, and any IP Phones which are
in, or go into, Local Mode, remain in Local Mode.
Table 26: LD 11 — Provision Branch User and SCPW at the Branch Office.
Prompt
REQ:
TYPE:
June 2014
Setting and changing the Station Control Password Configuration
on page 171 describes the general method of installing a
Response
NEW
CHG
a...a
Comments? infodev@avaya.com
Installing IP Phones through LD 11
Description
Add new data, or change existing data.
Terminal type.
Type.? for a list of possible responses.
Branch Office Installation and Commissioning
on
171

Advertisement

Table of Contents
loading

Table of Contents