Patch Management - Avaya 1000 Installation And Commissioning Manual

employs IPsec to provide security services, including confidentiality, authentication, and antireplay,
to application layer protocols. Communication Server 1000 provides simple, automated IPsec policy
configuration and avoids the complex configuration requirements inherent in many implementations
of IPsec.
ISSS network elements, or targets, are classified into two categories:
• Avaya UCM targets: these elements automatically belong to the Avaya UCM security domain;
you need not add them using the Avaya UCM ISSS management interface. An example of an
Avaya UCM target is a Call Server.
• Manual targets: you must manually configure these elements using the Avaya UCM ISSS
management interface before you can enable ISSS. An example of a manual target is Avaya
Call Pilot.
ISSS can manage up to a maximum of 1500 combined Avaya UCM and manual targets.
For more information on IP Security, see Avaya Security Management Fundamentals,
NN43001-604.

Patch Management

This feature has the following dependencies and restrictions:
• Linux dependency: This feature does not support Linux SS.
• The Server and Gateway Controller must support the current release of CS 1000.
• This feature is not backward compatible.
• This feature is not applicable for Loadware PEP's.
• Special Instructions appear by using PLIS command but not the overlay commands.
June 2014 Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Patch Management
81