Avaya 1000 Installation And Commissioning Manual page 151

2. Observe the CP PM version 1 BIOS output from bootup screen.
3. If the CP PM version 1 BIOS is less than 18, the Linux base installer can update the BIOS,
see Automatically upgrading the CP PM BIOS with the Linux Base installer
Automatically upgrading the CP PM BIOS with the Linux Base installer
This procedure is for CP PM version 1 cards. CP PM version 2 cards do not require a BIOS update.
1. Connect to serial port 1 on the CP PM.
2. Insert the Linux Base installation CF card into the faceplate CF slot.
3. Power on the system.
4. During the reboot memory check, quickly press CTRL C to enter the CP PM BIOS.
5. Figure 57: CP PM BIOS setup
defaults from the menu.
June 2014
Co-resident Call Server and Signaling Server software installation
on page 152 appears. Select Reset CMOS to factory
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
on page 151.
151