System Parameters; Customer Data; Trunk Models - Avaya 1000 Installation And Commissioning Manual

Preprogrammed data

System parameters

Table 53: System parameters
system.
Table 53: System parameters
Parameter
Low Priority Input Buffers (LPIB)
High Priority Input Buffers (HPIB)
Number of Call Registers (NCR)
Multiple Appearance Redirection Prime (MARP) feature allowed
Refer to "Capacity Engineering" in Avaya Communication Server 1000E: Planning and Engineering,
NN43041-220 for further information on buffer sizes.
The preprogrammed data also include virtual superloops 96, 100, 104, 108, and 112.

Customer data

The default customer number used in the preprogrammed data is zero (0).

Trunk models

Do not use the DIP Class of Service for Model 19 of TIE trunk mode. The correct Class of Service
for model 19 of TIE trunk mode is DTN.
All trunks are programmed as immediate start/ supervision = YES, with the exception of trunks with
an asterisk (*). Trunks marked with an asterisk (*) are set for wink start/ supervision = YES.
Table 54: Preprogrammed trunk route information
Mode Card
COT XUT
Branch Office Installation and Commissioning
212
on page 212 provides the default system parameter values for the
Model Signaling
1 GRD
2 LOP
3 GRD
4 LOP
5 GRD
Comments? infodev@avaya.com
Value
450
450
300
YES
DIP or DTN BIMP and
TIMP
DIP 3COM/600
DIP 3COM/600
DTN 3COM/600
DTN 3COM/600
DIP 3COM/900
June 2014