Print Pvq Statistics; Print Inventory - Avaya 1000 Installation And Commissioning Manual

Maintenance and diagnostics
Command

Print PVQ statistics

LD 117 contains a command to print PVQ statistics for the Branch Office zone. For more information
on PVQ, refer to Avaya Converging the Data Network with VoIP (NN43001-260).
Table 41: LD 117 PVQ statistics.
Command
PRT ZQOS <Zone>

Print inventory

The inventory (generated in LD 117) is for all IP Phones registered to the Server. This includes IP
Phones registered by a Virtual Office and Branch Office logins at the main office Call Server. At the
Server, inventory only includes IP Phones registered at the MG 1000B Gateway Controller, not all
the IP Phones physically located at the Branch Office.
To get an inventory of all IP Phones at a Branch Office, execute the INV GENERATE command at
the Branch Office with all Branch Users in Local Mode.
Important:
Do this only during a maintenance window.
To register all IP Phones at the CP PM, disconnect the LAN/WAN connection to the main office (not
recommended) or individually log out the IP Phones from the main office. See
page 177.
LD 117 contains inventory commands. These commands include the registered IP Phones.
Table 42: LD 117 — Print inventory.
Command
INV PRT
INV GENERATE
INV MIDNIGHT
Branch Office Installation and Commissioning
204
Description
Print a table of the notification level for the specified zone.
Description
Print the PVQ statistics for the Branch Office zone.
Description
Print STATUS, CARDS, SETS or ALL.
Generate inventory CARDS, SETS, ALL or ABORT.
Generate inventory CARDS, SETS, ALL, OFF or STATUS.
Comments? infodev@avaya.com
Test Local Mode on
June 2014