Test Local Mode - Avaya 1000 Installation And Commissioning Manual

TN using the Virtual Office login, the re-powered IP Phone is logged out at the main office Call
Server with the screen shown in
Phone remains registered to the main office TPS and is listed with the isetShow command.

Test Local Mode

A user in Normal Mode can test the survivability functionality by entering the Test Local Mode
command, as shown in
registering to the MG 1000B Call Server. The user should make a call and receive an MG 1000B-
based or PSTN-based call in Test Local Mode to be sure that the telephone works in the event of a
LAN/WAN failure.
Using the Test Local Mode feature
This procedure explains how to test the IP Phone for Local Mode operation. The IP Phone has been
configured using Branch User Config, overlays, and is operating in Normal Mode.
1. Press the Services key (the key with the Globe icon).
The Options menu is displayed (see
2. Use the navigation keys to highlight Test Local Mode.
3. Press the Select soft key.
The IP Phone displays Local Mode.
4. To register again at the main office:
a. Press theServices key to display the menu in
page 177.
Figure 77: Resume Normal Mode
The Virtual Office Login option only appears if VOLA CLS is configured.
b. Use the Navigation keys to highlight Resume Normal Mode.
c. Press the Select soft key.
If you fail to resume Normal Mode, Test Local Mode lasts for ten minutes, and then automatically
redirects the telephone to the main office Call Server.
June 2014
Figure 76: Virtual or Branch soft key display
Figure 66: Options menu
Figure 73: Options menu
Comments? infodev@avaya.com
on page 165. This results in the IP Phone
on page 174).
Figure 77: Resume Normal Mode
Branch Office Installation and Commissioning
Test Local Mode
on page 176. The IP
on
177