Installation and configuration summary
Contents
This section contains the following topics:
•
•
•
•
Introduction
This chapter provides a summary of the procedures required to install a new
IP Telephony node, add cards to the node, install the cards, transmit data to
the cards, and install the IP Phones. It also includes information about what
is required before beginning the installation procedures.
Read
Before you begin
Ensure that the CS 1000 system is running CS 1000 Release 5.0 software.
Installation summary
Use the following summary of steps as a reference guide to install and
configure an IP Telephony node and Voice Gateway Media Cards on a
system. This summary is intended to serve as a pointer to the more detailed
procedures contained in other chapters and to provide a sequential flow to
the steps involved in the overall installation procedure.
Complete all installation and configuration steps before transmitting data
to the Voice Gateway Media Cards.
Copyright © 2003–2008, Nortel Networks
.
"Introduction" (page 229)
"Before you begin" (page 229)
"Installation summary" (page 229)
"Voice Gateway Media Card installation summary sheet" (page 232)
"Codecs" (page 215)
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
before installing an IP Telephony node.
229