Rack-Mounting An Mg 1000B - Avaya 1000 Installation And Commissioning Manual

Tools and components
an ECOS 1023 POW-R-MATE or similar type of test meter
appropriate cable terminating tools
a drill for making lead holes
a computer for connecting directly to the MG 1000B Core by a DTE—DTE null modem cable,
with:
• teletype terminal (ANSI-W emulation, serial port, 9600 bps) for the Call Server, MG 1000B
Core, Signaling Server, and Voice Gateway Media Cards
• a web browser for Element Manager and NRS Management (configure cache settings to check
for new pages every time and to empty the cache when the browser is closed)

Rack-mounting an MG 1000B

Items required
To install each MG 1000B or MG 1000B Chassis Expander in a 19-inch rack, use the following
items:
• Equipment layout plan (for more information see, Avaya Communication Server 1000E
Installation and Commissioning, NN43041-310.
• One pair of left and right guide brackets
• One pair of left and right ear brackets
• Eight #12-24 screws
• Four #8-32 machine screws
The NTTK09 kit contains all of the above items with the exception of the equipment layout plan and
screws.
Mounting the MG 1000B in a 19-inch rack
1. Fasten the right guide bracket to the right rack support.
a. Insert two #10-32 machine screws into the two middle slots in the guide bracket and
into the respective holes in the right rack support. See
installed in a rack
b. Fasten the screws.
June 2014
on page 116.
Comments? infodev@avaya.com
Installing an MG 1000B Core
Figure 24: Guide bracket
Branch Office Installation and Commissioning
Check
115