Feature Interactions Between Branch User And Virtual Office Logins - Avaya 1000 Installation And Commissioning Manual

MG 1000B telephones
Figure 75: Virtual Office application menu
c. Press the Select soft key.
Feature interactions between Branch User and Virtual
Office logins
When an MG 1000B IP Phone user travels to the main office or another network location, the user
can access their own Main Office TN from an IP Phone at the visited location by using the Virtual
Office feature. The IP Phone at the Branch Office is forced to log out after the Virtual Office feature
is activated.
If the IP Phone has been forced to log out, the Virtual or Branch User soft key shows on the IP
Phone display area (see
is not operational in this mode. The user must log in to bring the IP Phone back into service.
Figure 76: Virtual or Branch soft key display
The Virtual and Branch soft keys are provided to reset the IP Phone to operational:
1. Press the Branch soft key to register the IP Phone to the main office.
2. Press the Virtual soft key to activate Virtual Office Login.
In either case, the user is prompted for the User ID and the SCPW.
When a Branch User IP Phone re-powers, it registers with the MG 1000B Call Server, and is
automatically redirected to the main office. If another IP Phone has already occupied the Main Office
Branch Office Installation and Commissioning
176
Figure 76: Virtual or Branch soft key display
Comments? infodev@avaya.com
on page 176). The IP Phone
June 2014