Verify Clid - Avaya 1000 Installation And Commissioning Manual

Verify CLID

LD 20 contains the CLIDVER prompt, which is used to verify the proper composition and
configuration of the Calling Line ID (CLID) for ESA and non-ESA calls. The prompt simulates a call
without actually making it and generates a report showing the CLID, zone numbers, and other
information.
Table 36: LD 20 Generate a CLIDVER report.
Prompt
REQ:
TYPE:
CUST
SORTBY
DN
TN
ESA_ONLY
SHORT
The CLIDVER report contains the CLID composed for the Branch User. If the report is generated on
the main office Call Server, the CLID is composed as follows:
• If ESA is enabled in the Branch Office, the CLID is the same as the value entered for the ESA
Locator parameter in the CHG ZESA command in LD 117 (see
page 183, step
• If ESA is not enabled, the CLID is the same as the CLID entry composed in LD 15.
If the CLIDVER report is generated on the MG 1000B CP PM, the CLID is the same as the CLID
entry composed in LD 15'
For more information about this feature, see Avaya Emergency Services Access: Description and
Administration, (NN43001-613).
June 2014
Response
PRT
CLIDVER
xx
(DN) TN
x...x,
l s c u
(YES) NO
(YES) NO
5 on page 184).
Comments? infodev@avaya.com
Description
Print
CLID Verification
Customer number as defined in LD 15.
The output/report will be sorted based on this flag.
If the response is DN, the LD prompts the user to enter the
DN, and the output is sorted by the DN.
If the response is TN, the LD prompts the user to enter the
TN, and the output is sorted by the TN.
Directory Number. If no value is entered, the report
includes all Directory Numbers.
Terminal Number
Format for Large System and Communication Server
1000E system, where l = loop, s = shelf, c = card, and u =
unit
Flag used to decide if the report should contain
information for ESA call type only or for all call types.
If the ESA package is not enabled, this input prompt does
NOT appear. The report contains non-ESA data only.
Flag to decide if the output report should be a Short
Report or a Long Report.
Configuring the main office
Branch Office Installation and Commissioning
Verify CLID
on
201