Zone Based Dialing - Avaya 1000 Installation And Commissioning Manual

Main office configuration
MADN_TIMER 15
PROXY_CHECKING NO
.
For SIP Line on the Main Office or Geographically Redundant Main Office, you must configure the
following parameters:
• SERVER_IP1_1 as the IP address of the MO SLG#1 and SERVER_PORT1_1 as the port of
the MO SLG#1.
• SERVER_IP1_2 as the IP address of the GR SLG#101 and SERVER_PORT1_2 as the port of
the GR SLG#101.
For SIP Line on the Branch Office, you must configure the following parameters:
• SERVER_IP1_1 as the IP address of the GR SLG#101 and SERVER_PORT1_1 as the port of
the GR SLG#101.
• SERVER_IP1_2 as the IP address of the BO SLG#1001 and SERVER_PORT1_2 as port of
the BO SLG#1001.

Zone Based Dialing

To configure zone based parameters, the Zone Based Dialing (ZBD) option is activated using LD
15, after it is set to YES, the DIALPLAN prompt is shown and user can select public or private on-
net dial plan.
Prompt
REQ:
TYPE:
VO_CUR_ZONE_TD
ZBD
The following procedure demonstrates a basic overview of the steps to follow to configure the ZBD.
For more information on the ZBD, see Avaya Dialing Plans Reference, NN43001-283.
1. Enable the Zone Based Dialing option in OVL15,
2. Set the dial plan option to the appropriate dial plan PUB or PRV.
3. Configure the numbering zones from Overlay 117.
4. Configure numbering zone parameters.
5. Configure CLID entries for a key of a set.
6. Configure sets with numbering zones and appropriate CLIDs.
Branch Office Installation and Commissioning
108
Response
CHG
FTR_DATA
NO (YES)
NO (YES)
Comments? infodev@avaya.com
Comment
Change existing data block
Customer Features and options
ZBD option
June 2014