Avaya 1000 Installation And Commissioning Manual page 223

The Zone table for the Main site contains zone information for every MG 1000B and SRG. The MG
1000B must have the zone information for its own individual zone, plus a zone for the virtual trunks.
The SRG must have the zone ID and VPNI setting defined in the configuration.
The zone table at the main office appears as follows:
Figure 83: Zone table for main office
The zone table configured on the MG 1000B appears as follows:
Figure 84: Zone table for branch
Note:
The VPNI setting on the Main Office, MG 1000B and SRG is set equal to 1 (the same non-zero
value).
June 2014
CS 1000 Main Office with MG 1000 B and SRG
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
223