Chapter 10: Main office configuration
Contents
This chapter contains the following topics:
Introduction
on page 98
IP Telephony Nodes
Adding Linux servers to a Node
SIP Client configuration
UNIStim LTPS
on page 109
Zone Based Dialing
Gateway application services
IP Phone passwords and parameters
MG 1000B IP Phone configuration
Introduction
This section describes the configuration of zones, IP Phone passwords and parameters, and MG
1000B IP Phones at the main office.
Branch Office configuration procedures at the Branch Office are discussed separately in
Office configuration
For more information about Main Office configuration, see IP Peer Networking Installation and
Commissioning, NN43001-313. Also refer to Avaya Communication Server 1000E Installation and
Commissioning, NN43041-310 or Avaya Communication Server 1000M and Meridian 1 Large
System Installation and Commissioning, NN43021-310 , appropriate for the system.
IP Telephony Nodes
The Element Manager application, within the Avaya UCM, provides an interface to configure IP
Telephony Nodes in an Avaya Communication Server 1000 system.
Branch Office Installation and Commissioning
98
on page 98
on page 102
on page 103
on page 108
on page 109
on page 109
on page 111
on page 158.
Comments? infodev@avaya.com
Branch
June 2014