View Status Of Branch Office Zone At Main Office Call Server; Change And Print Pvq Notification Levels - Avaya 1000 Installation And Commissioning Manual

Command
View status of Branch Office zone at main office Call
Server
LD 117 contains commands to view the status of Branch Office zones at the main office Call Server.
Table 39: LD 117 Display zone status.
Command
STAT ZONE [<Zone>]
STAT ZBR [<Zone>]

Change and print PVQ notification levels

The notification level can be changed on a zone-by-zone basis so that a particular zone, such as a
Branch Office zone, is monitored more closely than others. LD 117 contains commands for
changing and viewing the notification level for a zone. For more information on PVQ, refer to Avaya
Converging the Data Network with VoIP , NN43001-260.
Important:
The notification level for a Branch Office zone must be configured the same at both the main
office and the Branch Office.
Table 40: LD 117 Change/print PVQ notification levels.
Command
CHG ZQNL ALL <Level>
CHG ZQNL <Zone> <Level>
PRT ZQNL ALL
PRT ZQNL <Zone>
June 2014

View status of Branch Office zone at main office Call Server

Description
Disable features of the Branch Office zone. If no specific features are specified,
ALL is assumed.
Description
Display zone status table
Display status of Branch Office zones.
Description
Change the notification level for all zones.
Change the notification level for the specified zone.
Print a table of the notification level for all zones.
Comments? infodev@avaya.com
Branch Office Installation and Commissioning
203