Avaya 1000 Installation And Commissioning Manual page 135

b. Route the Ethernet patch cable through the hole you made in the back panel of the
UEM.
c. Plug the other end of the Ethernet patch cable into one of the Ethernet port couplers
mounted in the Ethernet port adapter plate.
d. Label the Ethernet port coupler as ELAN.
See the following figures.
Figure 39: ELAN connection on faceplate
Figure 40: ELAN connection on Ethernet port coupler
9. Connect the server to the TLAN subnet.
a. Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable (supplied) into the
TLAN network interface (TLAN port) on the faceplate of the server.
June 2014 Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Installing a Signaling Server
135