Figure 29: Dc Power Terminal Connectors On The Jcs 1200 Platform - Juniper JCS 1200 Hardware Manual

Figure 29: DC Power Terminal Connectors on the JCS 1200 Platform

d.
e.
JCS 1200 AC platform:
a.
CAUTION: This device does not provide a power control button. Powering off Routing
Engines or removing power modules and switch modules does not turn off electrical
current to the device. The device also might have more than one power cord. To
remove all electrical current from the product, make sure that all power cords are
disconnected from the power source.
b.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Related Topics
Remove the nut, split washer, flat washer, and cable lug from each
terminal post.
Remove the power cables.
Make sure the Routing Engines are powered off.
Disconnect all power cords on the JCS 1200 platform from the power
connectors.
Disconnecting Power from the JCS 1200 Platform
Chapter 7: Connecting the JCS 1200 Platform
67