Chapter 4
Unpacking the JCS 1200 Platform
Tools and Parts Required to Unpack the JCS 1200 Platform
Related Topics
This chapter describes how to prepare to install the JCS 1200 platform. Topics include:
Tools and Parts Required to Unpack the JCS 1200 Platform on page 39
Unpacking the JCS 1200 Platform on page 40
Verifying Parts Received for the JCS 1200 Platform on page 41
To unpack the JCS 1200 platform and prepare for installation, you need the following
tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the
shipping pallet
Blank panels to cover any slots not occupied by a component
Unpacking the JCS 1200 Platform on page 40
Verifying Parts Received for the JCS 1200 Platform on page 41
Tools and Parts Required to Unpack the JCS 1200 Platform
39