Jcs 1200 Media Tray Connectors And Leds; Figure 10: Jcs 1200 Media Tray Components - Juniper JCS 1200 Hardware Manual

Figure 9: JCS 1200 Media Tray
The media tray is a hot-swappable module that provides two USB connectors for use
by the Routing Engines, error LEDs, an ambient air temperature sensor and a pressure
sensor for use by the management module, and two compact flash bays.
You can order the JCS 1200 platform with one or two hot-swappable media trays.
The media trays can be installed in media tray bay 1 and media tray bay 2 to provide
redundancy.
Related Topics

JCS 1200 Media Tray Connectors and LEDs

Figure 10 on page 19 shows the location of LEDs and connectors on the media tray.

Figure 10: JCS 1200 Media Tray Components

Each media tray consists of the following components:
JCS 1200 Media Tray Connectors and LEDs on page 19
Replacing a JCS 1200 Media Tray on page 128
Troubleshooting JCS 1200 Media Tray Problems on page 88
Locating the JCS 1200 Media Tray Serial Number on page 200
USB connectors—Use these connectors to upgrade software on the Routing
Engines. The attached USB device must be compatible with USB v2.0, or earlier.
LED panel—The LEDs on the media tray provide status information for your
JCS 1200 platform. Table 11 on page 20 describes the functions of these LEDs.
Chapter 2: Hardware Component Overview
JCS 1200 Media Tray Connectors and LEDs
19