Replacing a JCS 1200 MUX Card
Topics include:
Removing a JCS 1200 MUX Card
Figure 68 on page 131 shows how to remove and install a multiplexer (MUX) card.
Figure 68: Removing and Installing a JCS 1200 MUX Card
To remove a MUX card (see Figure 68 on page 131):
1.
2.
3.
Installing a JCS 1200 MUX Card
Figure 69 on page 132 shows how to remove and install a multiplexer (MUX) card.
Removing a JCS 1200 MUX Card on page 131
Installing a JCS 1200 MUX Card on page 131
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Pull the release handle to the open position. The MUX card moves out of the bay
approximately 0.25 inch (0.6 cm).
Slide the MUX card out of the bay.
Chapter 10: Replacing Components in a JCS 1200 Platform
Replacing a JCS 1200 MUX Card
131