Jcs 1200 Routing Engine Control Panel Buttons And Leds; Figure 15: Jcs 1200 Routing Engine Control Panel - Juniper JCS 1200 Hardware Manual

The JCS 1200 platform provides 12 bays for Routing Engines. A Routing Engine is a
hot-swappable independent server with its own processors, memory, storage, network
controllers, operating system, and applications. The Routing Engine is installed in a
bay in the JCS 1200 platform and shares power, fans, switches, and ports with other
Routing Engines.
NOTE: JCS 1200 Routing Engines can be used only on the JCS 1200 platform.
The Ethernet controllers on the Routing Engine communicate with the network
through the Ethernet-compatible switch modules on the JCS 1200 platform. Network
signals to and from the Routing Engine are automatically routed to a
same-network-interface switch module through circuitry in the JCS 1200 platform.
Related Topics

JCS 1200 Routing Engine Control Panel Buttons and LEDs

NOTE: The control panel door is shown in the closed position in Figure 15 on page 25.
To access the power control button, you must open the control panel door.

Figure 15: JCS 1200 Routing Engine Control Panel

JCS 1200 Routing Engine Control Panel Buttons and LEDs on page 25
Powering On a JCS 1200 Routing Engine on page 73
Powering Off a JCS 1200 Routing Engine on page 74
Replacing a JCS 1200 Routing Engine on page 140
Locating the JCS 1200 Routing Engine Serial Number on page 203
KVM select button
JCS 1200 Routing Engine Control Panel Buttons and LEDs
Chapter 2: Hardware Component Overview
Activity LED
Mastership LED
Information LED
Blade-error LED
Media-tray select
button
Power-control button
Power-on LED
25