Figure 36: Removing A Jcs 1200 Bezel - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide
Figure 36 on page 98 shows how to remove a bezel.

Figure 36: Removing a JCS 1200 Bezel

To remove a bezel (see Figure 36 on page 98):
1.
2.
3.
4.
Installing a JCS 1200 Bezel
Figure 37 on page 99 shows how to install a bezel.
98
Installing a JCS 1200 Bezel
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Hold the bezel and press the blue release button on each side of the bezel.
Pull the bezel away from the JCS 1200 platform.
If you are instructed to return the bezel, follow all packaging instructions and
use any packaging materials for shipping that are supplied to you.