Figure 65: Removing a JCS 1200 Media Tray
To remove a media tray (see Figure 65 on page 129):
1.
2.
3.
Installing a JCS 1200 Media Tray
Figure 66 on page 129 shows how to install a media tray.
Figure 66: Installing a JCS 1200 Media Tray
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Pull the media tray release handle to the open position. The media tray moves
out of the bay approximately 0.25 in. (0.6 cm).
Slide the media tray out of the bay.
Chapter 10: Replacing Components in a JCS 1200 Platform
Installing a JCS 1200 Media Tray
129