Replacing A Jcs 1200 Bezel Filter; Removing A Jcs 1200 Bezel Filter; Installing The Jcs 1200 Bezel Filter; Figure 45: Jcs 1200 Bezel Filter - Juniper JCS 1200 Hardware Manual

Related Topics

Replacing a JCS 1200 Bezel Filter

Topics include:

Removing a JCS 1200 Bezel Filter

Figure 45 on page 107 shows a bezel filter.

Figure 45: JCS 1200 Bezel Filter

To remove a bezel filter:
1.
2.
3.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Removing a JCS 1200 Bezel Filter on page 107
Installing the JCS 1200 Bezel Filter on page 108
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Remove the bezel (see "Removing a JCS 1200 Bezel" on page 97).
Lay the bezel on a flat work surface and orient it so that the bottom of the bezel
is closest to you and the light path holes are to the right. The large rectangles in
the filter frame should be closest to you.
Chapter 10: Replacing Components in a JCS 1200 Platform
Replacing a JCS 1200 Bezel Filter
107