Replacing A Jcs 1200 Power Box; Removing A Jcs 1200 Power Box; Installing A Jcs 1200 Power Box; Figure 71: Removing And Installing A Jcs 1200 Network Clock Filler - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

Figure 71: Removing and Installing a JCS 1200 Network Clock Filler

To install a network clock filler (see Figure 71 on page 134):
1.
2.
3.
4.
Related Topics

Replacing a JCS 1200 Power Box

Topics include:

Removing a JCS 1200 Power Box

Figure 72 on page 135 shows how to remove and install a power box.
134
Replacing a JCS 1200 Power Box
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Make sure that the release handle on the network clock filler is in the open
position.
Slide the network clock filler into the module bay until it stops.
Push the release handle to the closed position.
Preventing Electrostatic Discharge Damage to the JCS 1200 Platform on page 154
Removing a JCS 1200 Power Box on page 134
Installing a JCS 1200 Power Box on page 136