Figure 74: Loosening Thumbscrews On The Lower Power Box; Figure 75: Removing And Installing A Jcs 1200 Power Box - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

Figure 74: Loosening Thumbscrews on the Lower Power Box

7.
8.
Installing a JCS 1200 Power Box
Figure 75 on page 136 shows how to remove and install a power box.

Figure 75: Removing and Installing a JCS 1200 Power Box

To install a power box (see Figure 75 on page 136):
1.
2.
136
Installing a JCS 1200 Power Box
Slide the power box away from the JCS 1200 platform.
If you are instructed to return the power box, follow all packaging instructions
and use any packaging materials for shipping that are supplied to you.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Orient the connectors on the back of the power box with the connectors in the
JCS 1200 chassis.