Outstanding Issues With The Jcs1200 Platform; Supported Pics For Shared Interfaces With The Jcs1200 Platform - Juniper JCS1200 - RELEASE NOTES Release Note

Control system and protected system domains

JCS1200 Control System and Protected System Domains Release Notes

Outstanding Issues with the JCS1200 Platform

Before connecting the T Series router to the JCS1200 platform, ensure that the bootROM

version for all FPCs is ROM Monitor Version 6.4 or later. If an FPC bootROM version is

earlier than Version 6.4, the FPC will not come online. To upgrade the firmware, you must

contact your Juniper Networks customer support representative.

To determine if you need to upgrade the FPC firmware, display the version of the firmware

on all FPCs by issuing the

user@host> show chassis firmware

Part

FPC 0

FPC 1

FPC 2

FPC 4

FPC 5

FPC 6

FPC 7

SPMB 0

SPMB 1

CAUTION: By default, SNMP is enabled on the management module. Do not disable

SNMP. If you disable SNMP, you might not be able to access the management module.

Errata with the JCS1200 Platform Documentation on page 3

Table 1 on page 2 shows the PICs that support shared interfaces:

Table 1: PICs Supporting Shared Interfaces

PIC Name

Gigabit Ethernet PICs

Gigabit Ethernet, SFP

10-Gigabit Ethernet PICs

10-Gigabit Ethernet, DWDM

show chassis firmware

command:

Type

Version

ROM

Juniper ROM Monitor Version 7.5b4

O/S