Table 16: Site Preparation Checklist - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide

Table 16: Site Preparation Checklist

Item or Task
Environment
Verify that environmental factors such as
temperature and humidity do not exceed
platform tolerances.
Power
Locate sites for connection of system
grounding.
Calculate the power consumption and
requirements.
Rack
Verify that your rack meets the minimum
requirements for the installation of the
platform.
Plan rack location, including required space
clearances.
If a rack is used, secure rack to floor and
building structure.
Related Topics
JCS 1200 Cabinet Requirements
The JCS 1200 platform can be installed in a standard 800-mm (or larger) enclosed
cabinet. The following topics describe cabinet requirements:
JCS 1200 Cabinet Size and Clearance Requirements
The minimum size cabinet that can accommodate the JCS 1200 platform is 600 mm
wide and 800 mm deep. A cabinet larger than the minimum requirement provides
better airflow and reduces the chance of overheating. To accommodate a single
JCS 1200 platform, the cabinet must be at least 12 U (21 in. (53.34 cm)) high.
34
JCS 1200 Cabinet Requirements
For More Information
"JCS 1200 Platform Environmental
Specifications" on page 187
"JCS 1200 DC Power Grounding
Requirements and
Warning" on page 178
Power Consumption for an
AC-Powered JCS 1200
Platform on page 190
Power Consumption for a
DC-Powered JCS 1200
Platform on page 192
JCS 1200 Cabinet Size and
Clearance
Requirements on page 34
JCS 1200 Rack Size and
Strength on page 36
"JCS 1200 Clearance Requirements
for Airflow and Hardware
Maintenance" on page 38
"JCS 1200 Connection to Building
Structure" on page 37
Overview of Preparing the Site for JCS 1200 Platform Installation on page 33
JCS 1200 Platform Environmental Specifications on page 187
JCS 1200 Cabinet Size and Clearance Requirements on page 34
JCS 1200 Cabinet Airflow Requirements on page 35
Performed By Date