Replacing a JCS 1200 Switch Module or Module Filler
Topics include:
Removing a JCS 1200 Switch Module or Module Filler
Figure 82 on page 143 shows how to remove and install a switch module.
Figure 82: Removing and Installing a JCS 1200 Switch Module
To remove a switch module or module filler (see Figure 82 on page 143):
1.
2.
3.
Installing a JCS 1200 Switch Module or Module Filler
Figure 83 on page 144 shows how to remove and install a switch module.
Removing a JCS 1200 Switch Module or Module Filler on page 143
Installing a JCS 1200 Switch Module or Module Filler on page 143
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Pull the release handle to the open position. The module moves out of the bay
approximately 0.25 in. (0.6 cm).
Slide the switch module out of the bay.
Replacing a JCS 1200 Switch Module or Module Filler
Chapter 10: Replacing Components in a JCS 1200 Platform
143